Key Takeaways
- How much gravel do I need depends on the length, width, and desired depth of your project.
- Gravel is commonly purchased by weight or volume depending on the supplier.
- Driveways, landscaping, and drainage projects may require different gravel types and depths.
- Ordering slightly more material can help account for compaction and uneven areas.
- Skid steers and compact tractors can make spreading larger quantities much easier.
How Much Gravel Do I Need?
If you’re planning a new driveway, repairing an existing one, installing drainage, or adding decorative rock, you’ve probably asked, how much gravel do I need?
Ordering too little means stopping halfway through the project. Ordering far too much can leave you with an expensive pile of material you don’t need.
Fortunately, you can get a good estimate with a few measurements and some basic math.
Start by Measuring the Area
You’ll need three measurements:
- Length
- Width
- Desired depth
For a rectangular area, multiply the length by the width to determine the square footage.
For example, a driveway that measures:
100 feet long × 12 feet wide = 1,200 square feet
Next, you’ll need to account for how deep the gravel will be.
How to Calculate Cubic Yards of Gravel
Bulk material is often measured in cubic yards.
First, convert your desired gravel depth from inches to feet.
For example:
4 inches ÷ 12 = 0.333 feet
Then multiply:
Length × Width × Depth
Using our 100-foot by 12-foot driveway:
100 × 12 × 0.333 = approximately 400 cubic feet
There are 27 cubic feet in one cubic yard:
400 ÷ 27 = approximately 14.8 cubic yards
So, based strictly on volume, that area at a 4-inch depth would require approximately 15 cubic yards of material.
Actual ordering quantities can vary based on the type of aggregate, compaction, existing surface, and how the supplier sells the material.
How Much Gravel for a Driveway?
Driveways are one of the most common reasons people need large quantities of gravel.
The amount required depends heavily on whether you’re:
- Refreshing an existing driveway
- Filling potholes
- Repairing washed-out sections
- Building a driveway from scratch
- Widening an existing driveway
Adding a surface layer to an established driveway requires much less material than constructing an entirely new driveway base.
For new construction, consider consulting your gravel supplier or an experienced contractor about the appropriate aggregate and base construction for your site.
Don’t Forget About Compaction
Gravel settles and compacts as equipment and vehicles travel over it.
That means the finished depth may be different from the loose depth when the material is first delivered.
Factors affecting compaction include:
- Aggregate type
- Material size
- Moisture
- Existing surface
- Equipment used
- Vehicle traffic
Account for these factors when determining your final order.
Gravel for Landscaping Projects
Gravel isn’t just for driveways.
It’s commonly used around:
- Landscape beds
- Fire pits
- Walkways
- Sheds
- Patios
- Drainage areas
- Outdoor seating areas
The same basic calculation can be used for these projects: measure the area and determine the desired depth.
Irregularly shaped landscaping areas can be divided into smaller rectangles or sections to make estimating easier.
Gravel for Drainage Projects
Drainage projects require a little more planning.
Gravel may be used around:
- French drains
- Drain tile
- Culverts
- Downspout drainage
- Foundation drainage
The appropriate aggregate and quantity depend on the drainage system you’re installing.
Before beginning excavation, always have underground utilities located and make sure you understand where the water will be directed.
How Are You Going to Move All That Gravel?
This is the part people sometimes forget.
Even a relatively small project can involve thousands of pounds of material.
Once the gravel arrives, you still have to move it.
For a small landscaping area, a shovel and wheelbarrow might be enough.
For larger projects, equipment can dramatically reduce the amount of manual labor involved.
Skid Steers for Moving and Spreading Gravel
A skid steer is one of the most versatile machines for gravel projects.
It can help with:
- Moving material
- Filling low areas
- Spreading gravel
- Rough grading
- Loading and unloading material
- Driveway repairs
Buddies Rentals offers several CAT skid steer options, allowing you to match the machine to the size of the project.
Compact Tractors for Driveway Maintenance
For longer driveways and acreage properties, a compact tractor can be another good option.
Our John Deere 2038R can be useful for projects involving:
- Gravel driveway maintenance
- Material movement
- Property grading
- Acreage maintenance
Pairing the right machine with the right attachment can save a tremendous amount of hand labor.
Hauling Gravel With a Dump Trailer
If you’re picking up your own material, a dump trailer can make transporting and unloading gravel easier.
Before hauling, however, pay close attention to weight.
Gravel is considerably heavier than materials such as mulch. A trailer may have enough physical space for more gravel than it can legally and safely carry.
Always stay within:
- Trailer payload limits
- Tow vehicle ratings
- Hitch ratings
- Applicable towing requirements
When in doubt, verify the weight of the material with the supplier before loading.
Should You Order Extra Gravel?
It can be helpful to have a little extra material available, especially when dealing with an irregular or uneven surface.
You may encounter:
- Unexpected low spots
- Areas requiring additional depth
- Material loss during spreading
- Compaction
However, you don’t want to automatically order significantly more than your calculation.
Talk with your material supplier about your project and expected compaction before placing a final order.
Plan the Equipment Before the Gravel Arrives
One of the easiest ways to make a gravel project harder is having a large pile delivered without a plan for moving it.
Before delivery day, decide:
- Where the material will be dumped
- How you’ll move it
- Whether equipment can access the area
- What attachment you’ll need
- Where you’ll start spreading
A little preparation can make the entire project run more smoothly.
Frequently Asked Questions
How much gravel do I need for my project?
Measure the length, width, and desired depth of the area. Multiply those measurements to calculate volume, then convert the result to the unit your supplier uses.
How many cubic feet are in a cubic yard?
There are 27 cubic feet in one cubic yard.
How much gravel do I need for a driveway?
It depends on the driveway dimensions, desired depth, existing base, aggregate type, and whether you’re building a new driveway or resurfacing an existing one.
Should I buy gravel by the ton or cubic yard?
That depends on the supplier. Gravel is commonly sold by weight, while some bulk landscape materials may be discussed by volume. Ask your supplier how they sell the specific aggregate you’re purchasing.
What equipment is best for spreading gravel?
A skid steer is an excellent option for many projects. Compact tractors can also work well for longer driveways and acreage maintenance.
Can I haul gravel in a dump trailer?
Yes, provided the loaded trailer remains within its rated payload and your tow vehicle is appropriately rated. Gravel is extremely heavy, so weight limits can be reached before the trailer looks full.
