Common Trenching Mistakes: 9 Problems to Avoid
Trenching might look simple: mark a line, start digging, and install whatever needs to go underground. In reality, common trenching mistakes can turn a straightforward weekend project into a much bigger job.
Whether you’re installing drainage, irrigation, electrical conduit, landscape lighting, or another underground line, planning matters.
Before renting equipment and breaking ground, here are nine mistakes worth avoiding.
Key Takeaways
- Common trenching mistakes include failing to locate utilities, choosing the wrong equipment, and digging before planning the route.
- Trench depth and width should be determined by the specific project and applicable requirements.
- A handheld trencher is useful for certain narrow trenching projects, but it isn’t the right tool for every excavation.
- Drainage projects require careful attention to grade and water discharge.
- Soil, roots, rocks, access, and existing landscaping should all be considered before work begins.
1. Digging Before Calling 811
This is one step you don’t want to skip.
Before excavation, contact Nebraska 811 and have applicable underground utilities located.
Buried lines may include:
- Gas
- Electric
- Communications
- Water
- Sewer
Keep in mind that privately owned underground facilities may not necessarily be marked through the standard utility locating process. Examples can include private irrigation, lighting, or other lines.
Know what’s underground before you start.
2. Choosing the Wrong Trenching Equipment
One of the most common trenching mistakes is assuming every trench should be dug with the same machine.
Different projects call for different equipment.
Handheld Trencher
Your handheld trencher can be a good option for appropriate narrow trenching projects where its specifications and site conditions fit the job.
Possible applications can include certain:
- Irrigation projects
- Landscape lighting
- Low-voltage installations
- Drainage applications
- Utility runs
Always verify that the required trench dimensions and ground conditions fall within the machine’s capabilities.
Mini Excavator
For larger excavation, a mini excavator may be the better choice.
Your CAT 301.7, 304, and 305 can handle projects requiring wider excavation, more material removal, or greater versatility.
3. Assuming You Know How Deep to Dig
There’s no universal trench depth that works for every project.
Required depth can depend on:
- What you’re installing
- Local codes
- Manufacturer specifications
- Frost considerations
- Drainage requirements
- Property conditions
For example, the requirements for electrical conduit may be completely different from those for a landscape drainage project.
Determine the required depth before you start digging.
4. Ignoring the Route of the Trench
The shortest route isn’t always the best route.
Before digging, look at the entire path.
Watch for:
- Trees
- Large roots
- Existing landscaping
- Fences
- Buildings
- Driveways
- Sidewalks
- Utility markings
- Irrigation systems
A little extra planning can prevent you from reaching an obstacle halfway through the project.
5. Forgetting About Soil Conditions
A machine that works well in one yard may perform very differently in another.
Conditions can include:
- Loose soil
- Heavy clay
- Compacted ground
- Rocks
- Roots
- Wet soil
Don’t assume the ground will be easy to trench simply because the lawn looks smooth from the surface.
6. Getting Drainage Slope Wrong
When you’re digging for drainage, the trench itself is only part of the project.
Water still needs somewhere appropriate to go.
Improper grading can contribute to:
- Standing water
- Poor drainage performance
- Water flowing toward structures
- Erosion
- Low spots
Determine the required drainage design and grade before excavation begins.
For drainage-specific projects, this is especially important.
7. Forgetting About the Dirt You Remove
Here’s something that’s easy to overlook: where is all that soil going?
Even a narrow trench can create a surprising amount of excavated material.
Before you start, decide whether you’ll:
- Backfill the trench
- Spread excess soil
- Haul material away
- Use it elsewhere on the property
If you’re excavating a larger trench with a mini excavator, you may also need a skid steer or dump trailer to manage material efficiently.
8. Trenching When the Ground Is Too Wet
Wet conditions can make excavation more difficult and can create additional ground concerns.
Depending on soil type, saturated ground may:
- Become muddy
- Rut easily
- Lose stability
- Stick to equipment
- Make cleanup more difficult
If you’ve had significant rain, evaluate the work area before bringing equipment onto it.
Waiting for better conditions can sometimes save a considerable amount of cleanup afterward.
9. Renting Before Measuring the Project
This is one of the easiest mistakes to prevent.
Before calling about equipment, know:
- Approximate trench length
- Required depth
- Required width
- What you’re installing
- Ground conditions
- Access limitations
- Major obstacles
Those details make it much easier to determine whether a handheld trencher, mini excavator, or another piece of equipment makes sense.
Trencher or Mini Excavator?
A good rule is to choose equipment based on the actual excavation, not simply the fact that you’re digging a trench.
A handheld trencher is designed for specific narrow trenching applications.
A mini excavator gives you more flexibility when the project requires:
- Wider excavation
- Working around obstacles
- Removing more soil
- Digging out rocks or roots
- Additional excavation elsewhere on the project
If you’re unsure, explain the project before renting rather than guessing.
Plan the Entire Project Before Digging
The best trenching projects usually start with planning rather than equipment.
Before excavation day:
- Determine what you’re installing.
- Verify applicable installation requirements.
- Contact 811.
- Mark the planned route.
- Measure the trench.
- Evaluate soil and access.
- Choose the appropriate equipment.
- Plan for excavated material.
- Determine how the area will be restored afterward.
That preparation can prevent many common trenching mistakes before the machine ever touches the ground.
Frequently Asked Questions
What are the most common trenching mistakes?
Some of the biggest mistakes include failing to locate utilities, choosing inappropriate equipment, digging to an incorrect depth, ignoring soil conditions, and failing to plan the entire trench route.
Should I use a trencher or mini excavator?
It depends on the trench dimensions, soil, access, obstacles, and overall project. A trencher is designed for certain narrow trenches, while a mini excavator provides more excavation flexibility.
Do I need to call 811 for a small trench?
Don’t assume a shallow or small project is exempt. Contact your state’s 811 service before digging and follow the instructions provided for your project.
Can a trencher cut through tree roots?
Roots can interfere with trenching and may create additional hazards or equipment limitations. Don’t assume a trencher can simply cut through whatever it encounters. Follow the equipment manufacturer’s instructions.
What happens to the dirt after trenching?
Much of it may be used to backfill after installation, but you can still end up with excess material depending on what is installed in the trench.
Can I trench after it rains?
Ground conditions matter. Saturated soil can make excavation and restoration more difficult, so evaluate the site and equipment requirements before starting.
